Ambala Chandigarh Expy, Punjab 140501, Sas Nagar, Punjab
GST No. 03AABCR7912E1ZR
Approx. Rs 3.85 Lakh / PieceGet Latest Price
Product BrochureProduct Details:Model Name/Number | sambion |
Brand | sambion |
Power | 220 V |
Usage/Application | Laboratory |
Temperature Range | 50-150 Degree Celsius |
Material | Stainless Steel |
Type | horizontal |
No Of Trays | 4 |
Drying Cabinet
"Link to the proposed model:
The participant must provide a link to the proposed model on the Manufacturer's website in English."
Technical specifications:
Microprocessor controlled equipment
Capacity of at least 115 liters At least eight (8) pre-programmed dry cycles
Temperature ranges from at least 60 to 180℃, or better Temperature accuracy +/- 2ºC
Visual and audible alarm for at least end of cycle, over temperature and system failure
Parameters set by rotary knob or digital panel
Digital adjustable timer Digital display with at least temperature indication
Internal chamber made of stainless steel AISI 304 or better
Exterior made of steel with powder coating or better
Protection system: over temperature
Power supply: 220 V ± 10 %, 50/60 Hz:
Components, spare parts, consumables:
Shelves required: minimum 3 shelves made of stainless steel or equivalent
The supplier (if necessary) must complete the equipment (taking into account the specifics of the proposed model) with all the necessary parts, components, materials (the cost of which should be included in the tender offer) for assembly, installation and commissioning at the workplace. Completeness should ensure the full functioning of the declared equipment.
The supplier (if necessary) must equip the equipment (taking into account the specifics of the proposed model) with all the necessary spare parts (the cost of which must be included in the tender offer) for its full operation during the warranty period. A list of such spare parts shall be submitted in the bid.
Quality and Safety Standards (As per Section II_Schedule of Requirements: Section II.2b - Manufacturer & Supplier Certification)
Product Certification (As per Section II_Schedule of Requirements: Section II.2c - Product Certification)
The awarded bidder is required to provide, where applicable, UNOPS with the hazardous property sheet (MSDS or alike) and documents under which the quality assurance was processed in the Manufacturer’s country, as shown in Operation and Service Manuals, within 2 weeks after award.
Confirm that Assembly and Calibration shall be completed as per Section II_Schedule of Requirements: Section II.2d - Assembly and Calibration
Confirm that Training services shall be provided as per Section II_Schedule of Requirements: Section II.2e - Online or On-Site Training Services
Confirm that Warranty and After-sales services shall be provided as per Section II_Schedule of Requirements: Section II.2f - Warranty and After-saes Services
Confirm that General Requirements as per Section II_Schedule of Requirements: Section II.2g - General Requirements are met
Documentation and Licences
Operating instructions in English and/or Russian and/or Uzbek language (if not available, please confirm that they shall be supplied together with the equipment):
Maintenance manual in English and/or Russian and/or Uzbek (if not available, please confirm that they shall be supplied together with the equipment).
All software shall support English and/or Russian language, shall be original and officially licensed to the beneficiary, without additional fees/subscriptions required for operating the equipment over its lifecycle.
Confirmation statement on the unloading of the goods within the final Lot of destination as per ITB specified Locations
Approx. Rs 4.95 Lakh / PieceGet Latest Price
Product BrochureProduct Details:Power | 220 V |
Usage/Application | Drying Cabinet |
Material | Stainless Steel |
drying cabinet
"Link to the proposed model:
The participant must provide a link to the proposed model on the Manufacturer's website in English."
Technical specifications:
Microprocessor controlled equipment
Capacity of at least 150 liters
At least eight (8) pre-programmed dry cycles
Temperature ranges from at least 60 to 180℃, or better
Temperature accuracy +/- 2ºC
Visual and audible alarm for at least end of cycle, over temperature and system failure
Parameters set by rotary knob or digital panel
Digital adjustable timer
Digital display with at least temperature indication
Internal chamber made of stainless steel AISI 304 or better
Exterior made of steel with powder coating or better
Protection system: over temperature
Power supply:
220 V ± 10 %, 50/60 Hz:
Components, spare parts, consumables:
Shelves required: minimum 3 shelves made of stainless steel or equivalent
The supplier (if necessary) must complete the equipment (taking into account the specifics of the proposed model) with all the necessary parts, components, materials (the cost of which should be included in the tender offer) for assembly, installation and commissioning at the workplace. Completeness should ensure the full functioning of the declared equipment.
The supplier (if necessary) must equip the equipment (taking into account the specifics of the proposed model) with all the necessary spare parts (the cost of which must be included in the tender offer) for its full operation during the warranty period. A list of such spare parts shall be submitted in the bid.
Explore More Products
© Rockwell Industrial Plants Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited